Gold Member Since 2014
Audited Supplier
Yangzhou Senyida Coating Equipment Manufacturing Co., Ltd.

Powder Coating, Polyester Powder Coating, Powder Coating Paint manufacturer / supplier in China, offering Powder Coating Paint of Fluorescent Transparent Red, Powder Coating (Light Ivory), Powder Coating (Patina Green) and so on.

(/ )

Supplier Homepage Product powder coatings Powder Coating Paint of Fluorescent Transparent Red

Powder Coating Paint of Fluorescent Transparent Red

Purchase Qty.:
500-49,999 50,000+
FOB Unit Price: US $3 US $4
Purchase Qty. (kgs) FOB Unit Price
500-49,999 US $3
50,000+ US $4
Get Latest Price
Production Capacity: 1000 Tons/Year
Transport Package: Carton Packaging
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: Fluorescent Transparent Red
  • Appearance: Powder
  • Level: Finish Coat
  • Certification: ISO9001, SGS
  • Components: Resin, Pigment, Curing Agents and Additives
  • Expiration Date: 1 Year
  • Trademark: SENYIDA
  • Origin: Yangzhou, Jiangsu
  • Color: Red
  • Main Raw Material: Epoxy
  • Method: Spray
  • Substrate: Metal
  • Formation Mechanism: Spray and Bake
  • Powder Coating: Fluorescent Transparent Red
  • Specification: SGS
Product Description
Art powder coating
General Introduction:

The art powder coating can be both used for indoor and outdoor. This product has a unique decorative effect luxurious appearance. It can help cover up the defects of the substrate.
You need to pay attention to two points. First, since the products contain metallic pigments, when using an electrostatic gun construction should ensure that the system is well grounded, while setting a lower amount of static voltage and flour, to prevent sparking phenomenon when spraying. Second, in order to improve the decorative and overcome the metal coating easy to clean off the paint, we recommend to use the transparent powder coatings to carry varnish.

Product seiers:

We provide sand grain, hammer, silk stripes, marbling, metal and other effects of the product appearance. And we can offer a variety of shiny products based on user demand.

Powder physical properties:

Proportion: 1.2-1.8 (depending on the color and gloss )

Particle size distribution: 100% less than 100 microns (depending on the

Specific indicators art effects ).

Liquidity: 120-140

Average coverage:

6-10m3/kg, the membrane is 60μ M(calculate by 100% utilization rate of powder coating).


Carton packaging, lined with double polyethylene bag, net weight 20 kg.

Storage requirements:

Store below 30 ° C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited. Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

Health and safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
Coating performance
Test itemsInspection standardsTest indicators
Impact resistanceISO6272GB/T1732-199330-50kg/cm
Cupping testISO1520GB/T9753-19886mm
The adhesion (grid method)ISO2409GB/T9286-19980
Pencil HardnessASTMD3363GB/T6739-19961H-2H
Salt spray testISO7253GB/T1771-1991>500 hours
Damp heat testISO6270GB/T1740-1979>1000 hours

Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.

2.The above coating performance may be lower as shiny and slightly lower.
Send your message to this supplier
Mr. Albert
To: Mr. Albert

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now