Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Registered Capital:
10080000 RMB
Plant Area:
>2000 square meters
Management System Certification:
ISO 9001, ISO 14001
Average Lead Time:
Peak season lead time: 3-6 months
Off season lead time: 1-3 months
Sample Available

Powder Coating, Powder Coatings, Acrylic Powder Coating manufacturer / supplier in China, offering High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads, High Temperature Resistant Epoxy Polyester Powder Ceramic Car Metal Coating, Electrostatic Epoxy Polyester Powder Ceramic Car Metal Coating and so on.

Gold Member Since 2014
Audited Supplier
Supplier Homepage Products special powder coating High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads
  • High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

Purchase Qty. / Reference FOB Price
500-49,999 kgs US $2.5
50,000+ kgs US $3.5
Port: Shanghai, China
Production Capacity: 1000 Tons/Year
Payment Terms: T/T
Color: Ral Colour Cards
Appearance: Powder
Main Raw Material: Epoxy
Level: Finish Coat
Method: Spray
Certification: ISO14001, ISO9001, SGS

You Might Also Like

Loading...

Basic Info.

Model NO.
Brake Pads
Substrate
Metal
Components
Resin,Pigment,Curing Agents and Additives
Formation Mechanism
Non Conversion Type
Expiration Date
1 Year
Brake Pads
Professional
Trademark
SENYIDA
Transport Package
Carton Packaging
Specification
SGS
Origin
Yangzhou, Jiangsu
HS Code
3206499000
Professional Powder Coating for Brake Pads 
  

1.General introduction:

We have focused on the professional powder coating for brake pads  for more than 10 years.And  we have cooperated with many large manufacturers.

2.Product series: 
 
 We Provide high light (above 86%), plain glass(76-85%), matt (20-50%) and low 
light (below 20%) of the full-color powder coatings products.Gloss can also be 
controlled according to the user's requirements.


3.Packing:

Carton packaging, lined with double polyethylene bag, net weight 20 kg.
   
4.Storage requirements:

Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
   
5.Powder physical properties: 

       
       Proportion : 1.1-1.8 (depending on the color and gloss ) 

     
     Particle size distribution: 100% less than 125 microns(more than 85% between 60-90).
     
     Liquidity:18~35mm.
     
    Curing conditions:180°C,15minutes.


6.Average coverage:

8-10/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).

7.Health and safety:
 
This product is non-toxic. 
In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.


8.Coating performance
 
Coating performance
Test itemsInspection standardsTest indicators
High lightGlazed/Matte/Low light 
Impact resistanceISO6272GB/T1732-199350kg/cm40kg/cm
Cupping testISO1520GB/T9753-19888mm7mm
The adhesion (grid method)ISO2409GB/T9286-19980
BendingISO1519GB/T6742-19862mm3mm
Pencil HardnessASTMD3363GB/T6739-19961H-2H
Salt spray testISO7253GB/T1771-1991>500 hours
Damp heat testISO6270GB/T1740-1979>1000 hours
Heat resistance110°C/24 hours(white)Good gloss retention,E≤0.3-0.4
Florida weathering exposureISO2810South 45 °,12monsGloss retention≥50%
Artificial accelerated aging60°C/8hours + 50°C/4hours condensing,cycle for 500hoursGloss retention≥50%                         Color stability:E≤0.35
 
Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
 2.The above coating performance may be lower as shiny and slightly lower.

9.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company. 
2). The material we choose is always good and products always come out with high quality. 
3). A trial order or sample orders are welcomed. 
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world. 
5). We will do our best to service you all the time if you have the further question.
 
10.MSDS for powder coating.
High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

11.
We have our own factory, 8 production lines and a complete set of testing equipment.
High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

12.We will arrange for SGS testing at regular intervals. In order to confirm our products meet the environmental standards.
High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

13.
We do many certifications to confirm every parts meet the national standard.

High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads

14. We have exported to many countries, and getting unanimous praise. Also many customers visited our company.
High Temperature Resistant Epoxy Polyester Powder Coating for Brake Pads




 

Send your message to this supplier

*From:
*To:
avatar Mr. Albert
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now