Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Registered Capital:
10080000 RMB
Plant Area:
>2000 square meters
Management System Certification:
ISO 9001, ISO 14001
Average Lead Time:
Peak season lead time: 3-6 months
Off season lead time: 1-3 months
Sample Available

Thermosetting Powder Coating, Epoxy Powder Coatings, Polyester Powder Coatings manufacturer / supplier in China, offering Ral Colours Powder Paint Powder Coating, Ral Colours All Models Epoxy Polyester Powder Coating Powder Metal Coating, Interior Powder Coating Car/Automotive/Auto Body Metallic Spray Chrome Epoxy Paint and so on.

Gold Member Since 2014
Audited Supplier
  • Ral Colours Powder Paint Powder Coating
  • Ral Colours Powder Paint Powder Coating
  • Ral Colours Powder Paint Powder Coating
  • Ral Colours Powder Paint Powder Coating
  • Ral Colours Powder Paint Powder Coating
  • Ral Colours Powder Paint Powder Coating

Ral Colours Powder Paint Powder Coating

Purchase Qty. / Reference FOB Price
500-4,999 kg US $2.5
5,000+ kg US $4
Port: Shanghai, China
Production Capacity: 1000 Tons/Year
Payment Terms: T/T
Color: Ral Colour Cards
Appearance: Powder
Main Raw Material: Epoxy
Level: Finish Coat
Method: Spray
Certification: ISO14001, ISO9001, SGS

You Might Also Like

Loading...

Basic Info.

Model NO.
Ral Colours
Substrate
Metal
Components
Resin, Pigment, Curing Agents and Additives
Formation Mechanism
Non Conversion Type
Expiration Date
1 Year
Coating
Painting
Trademark
SENYIDA
Transport Package
Carton Packaging
Specification
SGS
Origin
Yangzhou, Jiangsu
HS Code
3206499000
Thermosetting Powder Coating   

1.General introduction:
  
Powder coatings are mixed with a certain proportion of the resin, fillers,
curing agents and other additives, then prepared by hot extrusion ,crushed  and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

2.Feature:

1).The products are non-toxic, solvent-free and non-toxic volatile substances,there are no intoxication, no fire, no "three wastes" emissions and other pollution problems, in full compliance with national environmental laws. 
2). Raw material utilization is high, the highest utilization rate even more than99%. 
3). After being pre-coated handle, disposable construction, without primer,you can get a sufficient thickness of the coating, easy to automate operation, high production efficiency, reduce costs.           
4). Dense coating adhesion, good impact strength and toughness, high coverage corners, with excellent resistance to chemical corrosion and electrical insulation properties. 
5).Powder coatings storage and transport are safety and convenience.   
     
3.Product series: 
   
  The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.
 
4.Powder physical properties: 
 
   Proportion : 1.2-1.8 (depending on the color and gloss ) .
 
   Particle size distribution: 100% less than 125 microns (more than 85% between 60 to 90).

   Liquidity(180°C):22~35mm.

   Curing conditions:200°C,10 minutes.

5.Average coverage:

8-10m³/kg, the membrane is 60μm (calculate by 100% utilization rate of powder coating).

6.Packing:

   Carton packaging, lined with double polyethylene bag, net weight 20 kg.
   
7.Storage requirements:

   Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

8.Health and safety:
 
This product is non-toxic.
In the course of inhalation of dust should be avoided. The operators should wear  appropriate dust mask and glasses.

9.Coating performance

 
Coating performance
Test itemsInspection standardsTest indicators
High lightGlazed/Matte/Low light 
Impact resistanceISO6272GB/T1732-199350kg/cm40kg/cm
Cupping testISO1520GB/T9753-19888mm7mm
The adhesion (grid method)ISO2409GB/T9286-19980
BendingISO1519GB/T6742-19862mm3mm
Pencil HardnessASTMD3363GB/T6739-19961H-2H
Salt spray testISO7253GB/T1771-1991>500 hours
Damp heat testISO6270GB/T1740-1979>1000 hours
Heat resistance110°C/24 hours(white)Good gloss retention,E≤0.3-0.4
Florida weathering exposureISO2810South 45 °,12monsGloss retention≥50%
Artificial accelerated aging60°C/8hours + 50°C/4hours condensing,cycle for 500hoursGloss retention≥50%                         Color stability:E≤0.35
 
Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
 2.The above coating performance may be lower as shiny and slightly lower.

10.Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company. 
2). The material we choose is always good and products always come out with high quality. 
3). A trial order or sample orders are welcomed. 
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world. 
5). We will do our best to service you all the time if you have the further question.

 
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating
Ral Colours Powder Paint Powder Coating

















 

 

 

Send your message to this supplier

*From:
*To:
avatar Mr. Albert
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now